{"title":"EV charging cable locks and theft protection","description":"\u003cp\u003eChoose cable theft protection for the way your equipment is exposed: an unplugged connector, an accessory that needs retaining or a cable at risk of being cut.\u003c\/p\u003e\u003ch2\u003eProtect the right part of the installation\u003c\/h2\u003e\u003cp\u003eDuring charging, connector retention depends on the vehicle and charger. Between sessions, a removable cable left outside needs a different storage routine. On an open parking site, the accessible cable length may need dedicated protection. Identify the situation before comparing accessories.\u003c\/p\u003e\u003ch2\u003eStore a Type 2 connector\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/en\/products\/type-2-cable-lock-holder-dock-code\"\u003eDock Code\u003c\/a\u003e uses a three-digit mechanical combination to retain an unplugged connector in its wall holder. Check the handle shape before ordering. It does not secure a connector during charging or prevent the exposed cable from being cut.\u003c\/p\u003e\u003ch2\u003eRetain a compatible accessory\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/en\/products\/security-tether-cable\"\u003eTether\u003c\/a\u003e provides supplementary retention where suitable attachment points exist. Avoid compressing the electrical cable. \u003ca href=\"\/en\/products\/j1772-adapter-lock-j\"\u003eLock J\u003c\/a\u003e is for compatible J1772 adapter arrangements and is not a universal Type 2 lock.\u003c\/p\u003e\u003ch2\u003ePlan cable cut protection\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/en\/products\/ev-charging-cable-cut-protection-shield\"\u003eCatStrap EV Cable Shield\u003c\/a\u003e is offered in the AC 3 m Shield-only configuration at €499. Other lengths and DC projects require a quotation. Check cable diameter, charger reference, required movement and fixing conditions. No accessory guarantees complete protection against theft.\u003c\/p\u003e\u003ch2\u003eThree checks before buying\u003c\/h2\u003e\u003col\u003e\u003cli\u003eConfirm the connector: Type 2, J1772\/Type 1, CCS and NACS are different.\u003c\/li\u003e\u003cli\u003eIdentify the use: charging, storage or transport.\u003c\/li\u003e\u003cli\u003eIdentify the risk: removal, pulling, cutting or everyday wear.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eFor daily organisation, explore our \u003ca href=\"\/en\/collections\/ev-charging-cable-storage\"\u003ecable holders and bags\u003c\/a\u003e. Read the \u003ca href=\"\/en\/blogs\/ev-charging-protection-guides\/prevent-ev-charging-cable-theft\"\u003ecable theft guide\u003c\/a\u003e or compare \u003ca href=\"\/en\/blogs\/ev-charging-protection-guides\/cut-resistant-sleeve-cable-guard-ev\"\u003ecut-resistant protection\u003c\/a\u003e for a site project.\u003c\/p\u003e","products":[{"product_id":"cable-antivol-appoint-tether","title":"Accessory security cable — Tether","description":"\u003cp\u003eAdds a deterrent mechanical link to an accessory with a suitable attachment point. It does not replace a certified lock or the charger lock. Do not compress the electrical cable.\u003c\/p\u003e\u003ch2\u003eCompatibility and installation\u003c\/h2\u003e\u003cp\u003eCheck equipment dimensions and manufacturer instructions. These accessories do not replace the electrical protection required for your installation.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIdentify the accessory, cable or space to protect.\u003c\/li\u003e\u003cli\u003eCheck dimensions, anchoring and unlocking procedure.\u003c\/li\u003e\u003cli\u003eConfirm permitted use and traffic constraints on site.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/en\/pages\/contact?product=cable-antivol-appoint-tether\"\u003eDescribe your installation\u003c\/a\u003e · \u003ca href=\"\/en\/pages\/ev-charger-protection-guide\"\u003eRead the selection guide\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eIn the same category\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/en\/collections\/ev-charging-security\"\u003eCharging space security and anti-theft accessories\u003c\/a\u003e\u003c\/p\u003e","brand":"Proctelec","offers":[{"title":"Default Title","offer_id":60770691973454,"sku":"PCT-TETHER-01","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/2490\/6574\/files\/proctelec-tether-concept.webp?v=1789144676"},{"product_id":"verrou-adaptateur-j1772-lock-j","title":"J1772 charging adapter lock — Lock J","description":"\u003cp\u003eAdds mechanical retention to certain J1772 adapter configurations. Verify vehicle model, year, adapter and release procedure. Not for Type 2 connectors.\u003c\/p\u003e\u003ch2\u003eCompatibility and installation\u003c\/h2\u003e\u003cp\u003eCheck equipment dimensions and manufacturer instructions. These accessories do not replace the electrical protection required for your installation.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIdentify the accessory, cable or space to protect.\u003c\/li\u003e\u003cli\u003eCheck dimensions, anchoring and unlocking procedure.\u003c\/li\u003e\u003cli\u003eConfirm permitted use and traffic constraints on site.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/en\/pages\/contact?product=verrou-adaptateur-j1772-lock-j\"\u003eDescribe your installation\u003c\/a\u003e · \u003ca href=\"\/en\/pages\/ev-charger-protection-guide\"\u003eRead the selection guide\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eIn the same category\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"\/en\/collections\/ev-charging-security\"\u003eCharging space security and anti-theft accessories\u003c\/a\u003e\u003c\/p\u003e","brand":"Proctelec","offers":[{"title":"Default Title","offer_id":60770692399438,"sku":"PCT-LOCK-J1","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/2490\/6574\/files\/proctelec-lock-j-concept.webp?v=1789144676"},{"product_id":"support-antivol-cable-type-2-dock-code","title":"Dock Code — Type 2 charging cable holder with combination lock","description":"\u003cp\u003eKeep your charging cable in its place between sessions. Dock Code combines a wall holder with a mechanical lock for a stored Type 2 connector.\u003c\/p\u003e\n\u003ch2\u003eStore it, then lock it\u003c\/h2\u003e\u003cp\u003eIn a shared garage, carport or private charging area, an unsecured connector is easy to remove. Dock Code holds the unplugged connector in a dedicated socket and secures its retention with a three-digit combination. The upper supports carry the cable loops, keeping the connector off the ground and your charging area organised.\u003c\/p\u003e\u003cp\u003eAfter charging, stop the session and disconnect according to the vehicle instructions. Coil the cable loosely, place the connector in the holder and lock it. There is no extra key to carry. Keep the combination private and change it according to the supplied instructions when authorised users change.\u003c\/p\u003e\n\u003ch2\u003eCheck the connector before ordering\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eConnector\u003c\/th\u003e\u003ctd\u003eType 2 \/ IEC 62196-2. Check the outer shape of the handle.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eUse\u003c\/th\u003e\u003ctd\u003eStorage of an unplugged connector between sessions.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eLock\u003c\/th\u003e\u003ctd\u003eThree-digit mechanical combination.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBody\u003c\/th\u003e\u003ctd\u003eBlack ABS + PC.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMounting\u003c\/th\u003e\u003ctd\u003eWall mounting on a suitable surface.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eType 2 connectors can have different outer housings. Compare your handle with the product photographs and allow enough clearance around it. This model is not intended for J1772\/Type 1, CCS or NACS connectors. If unsure, send us a photograph of your connector before buying.\u003c\/p\u003e\n\u003ch2\u003eProtection between charging sessions\u003c\/h2\u003e\u003cp\u003eThe lock retains the connector while it is stored in the holder, helping deter opportunistic removal. It does not lock a connector while the car is charging and does not replace the retention system built into the vehicle or charger.\u003c\/p\u003e\u003cp\u003eDock Code does not provide cut-resistant protection for the cable length, which remains accessible. No certified burglary-resistance rating is claimed. For an exposed site facing repeated cutting attempts, assess a dedicated mechanical cable protection system.\u003c\/p\u003e\n\u003ch2\u003eMake everyday storage easy\u003c\/h2\u003e\u003cp\u003eChoose a position where you can reach the connector without stretching the cable or obstructing a walkway. Use fixings suitable for the wall and the load. Keep generous cable loops and respect the cable manufacturer's bend radius. Do not use the holder to conceal damage or continue using a damaged cable.\u003c\/p\u003e\u003cp\u003eThe product includes the holder and locking mechanism. Charger, cable and vehicle are not included. For transport, pair your storage routine with a \u003ca href=\"\/en\/products\/ev-charging-cable-bag-carry\"\u003eCarry charging cable bag\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/en\/blogs\/ev-charging-protection-guides\/prevent-ev-charging-cable-theft\"\u003eRead the cable theft prevention guide\u003c\/a\u003e · \u003ca href=\"\/en\/pages\/contact\"\u003eCheck compatibility with Proctelec\u003c\/a\u003e\u003c\/p\u003e","brand":"Proctelec","offers":[{"title":"Default Title","offer_id":60811859853646,"sku":"PCT-DOCK-CODE-T2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/2490\/6574\/files\/proctelec-dock-code-support-antivol-type-2.png?v=1789411487"},{"product_id":"protection-anticoupure-cable-recharge-ev-cable-shield","title":"EV Cable Shield — AC 3 m cut-resistant cable protection","description":"\u003cp\u003eProtect an exposed AC charging cable with CatStrap EV Cable Shield. The entry configuration is 10 ft, approximately 3 m, without DyeDefender, priced at €499.\u003c\/p\u003e\n\u003ch2\u003eWhat the €499 configuration includes\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\u003cth\u003eCharging type\u003c\/th\u003e\u003ctd\u003eLevel 2 — alternating current (AC).\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eNominal length\u003c\/th\u003e\u003ctd\u003e10 ft, described as 3 m by the manufacturer.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eVersion\u003c\/th\u003e\u003ctd\u003eShield-only, without DyeDefender.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eCatStrap.\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePrice\u003c\/th\u003e\u003ctd\u003e€499 for one kit. Fitting and charging equipment excluded.\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThis price applies to the stated charging type and length. It is not a DC fast-charging configuration or a kit for any cable length. Ask for a suitable quotation for other lengths or DC installations before ordering.\u003c\/p\u003e\n\u003ch2\u003eA mechanical layer around the cable\u003c\/h2\u003e\u003cp\u003eCatStrap describes EV Cable Shield as reinforced multilayer protection intended to make cutting more difficult. The standard kit includes the protection, its extension element, an outer covering and the fixing accessories specified by CatStrap. The €499 version includes no alarm, tracking or dye-marking option.\u003c\/p\u003e\u003cp\u003eThe product retains the CatStrap brand. The manufacturer's photograph shows an installation example: the charger, electrical cable, vehicle and pedestal are not included.\u003c\/p\u003e\n\u003ch2\u003eCheck your charger and cable\u003c\/h2\u003e\u003cp\u003eEnter the charger make and model and the cable's outer diameter in the product form. Also measure the length requiring protection and inspect the cable exit and fixing arrangement. If compatibility is uncertain, contact Proctelec before purchase with photographs of the charger and cable exit.\u003c\/p\u003e\u003cp\u003eThe protection must preserve normal handling, connector reach, storage and inspection access. Have the integration checked by the charger manufacturer or maintenance provider. Respect the specified bend radius, thermal requirements and any existing cable retraction system. Never cover a damaged cable to keep using it.\u003c\/p\u003e\n\u003ch2\u003ePurpose and limits\u003c\/h2\u003e\u003cp\u003eA mechanical barrier aims to make theft attempts more difficult; it cannot guarantee that theft will not occur. This page does not claim a certified resistance time, independent test result or automatic compensation. Applicable functions and conditions depend on the exact configuration supplied.\u003c\/p\u003e\u003cp\u003eFor several chargers, validate one representative installation before equipping the whole site. Combine the protection with a clear reporting and inspection process.\u003c\/p\u003e\n\u003ch2\u003eOrder the AC version or discuss a project\u003c\/h2\u003e\u003cp\u003eThe AC 3 m version is available to order at €499. Availability and lead time depend on the configuration. For another length, DC charging or installation services, \u003ca href=\"\/en\/pages\/contact\"\u003erequest a configuration quotation\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor a simpler storage requirement, explore \u003ca href=\"\/en\/products\/type-2-cable-lock-holder-dock-code\"\u003eDock Code for Type 2 connectors\u003c\/a\u003e. Compare the uses in our \u003ca href=\"\/en\/blogs\/ev-charging-protection-guides\/cut-resistant-sleeve-cable-guard-ev\"\u003ecut-resistant sleeve and cable guard EV guide\u003c\/a\u003e.\u003c\/p\u003e","brand":"CatStrap","offers":[{"title":"Default Title","offer_id":60811863228750,"sku":"CAT-EV-SHIELD-AC-3M","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1078\/2490\/6574\/files\/catstrap-ev-cable-shield-exemple-fabricant.jpg?v=1789411531"}],"url":"https:\/\/proctelec.com\/en\/collections\/ev-charging-cable-locks.oembed","provider":"Proctelec","version":"1.0","type":"link"}